10G SFP+

The SFP+ is the enhanced small form-factor pluggable. SFP 10GB transceivers are interchangeable with SFP transceivers and can be used in the same cages as SFP transceivers. For 10 Gbps applications, SFP 10GB Optics have a smaller footprint and lower power consumption than XFP transceivers. The electrical interface to the host board for SFP and SFP+ modules is a serial interface. It will support 8 Gbit/s on Fibre Channel and 10 Gbit/s on Gigabit Ethernet and Optical Transport Network standard OTU2. The optics always have a Tx side (sending laser) and a Rx side (receiver). The difference between the sending power (in dB) and the receiving power (in dB) is called the power budget and will determine the distance an optic can cover, where also the laser light (in nanometers) has an important role. The SFP 10G is available in SFP+, CWM SFP 10Gb, DWDM SFP+ 10Gb. The SFP 10GB is also available as a BIDI optic, which has only 1 LC plus and will work on 1 single strand of Single Mode fiber.

  • QUALITY
    • The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directivices. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.

    • The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.

    • FDA is an agency within the Department of Health and Human Services.  The FDA is responsible for protecting the public health by assuring the safety, efficacy, and security of human.

    • Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform),

    • The certificate shows, that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities, how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. ISO 14001 is an international standard that specifies a process for controlling and improving a company's environmental performance.

    • Underwriters Laboratories Inc. (UL) is an independent product safety certification organization that has been testing products and writing Standards for Safety for over a century.

Script logo
back to top